garage door opener MERCEDES-BENZ SL550 2007 R230 Owner's Manual

Contents
Vehicle status message memory
menu ............................................ 152
Settings menu .............................. 153
Trip computer menu..................... 163
TEL menu* ................................... 165
Automatic transmission ..................... 168
Gear selector lever position ......... 170
Driving tips ................................... 171
Gear ranges ................................. 172
Automatic shift program .............. 173
Gear selector lever one-touch
gearshifting .................................. 174
Steering wheel gearshift control
one-touch gearshifting* ............... 175
Manual shift program
(SL55AMGandSL65AMG only) 177
Emergency operation
(Limp-Home Mode) ...................... 179
Good visibility .................................... 180
Headlamp cleaning system .......... 180
Rear view mirrors ......................... 180
Sun visors .................................... 182
Rear window defroster ................. 183Automatic climate control .................. 184
Deactivating the automatic
climate control system ................. 187
Operating the automatic climate
control system in automatic mode 187
Setting the temperature................ 188
Adjusting air distribution............... 189
Adjusting air volume ..................... 190
Maximum cooling MAXCOOL ........ 190
Front defroster.............................. 190
Air recirculation mode .................. 191
Air conditioning............................. 193
Residual heat and ventilation ........ 194
Ventilated glove box ..................... 195
Power windows .................................. 196
Opening and closing the
windows ........................................ 196
Synchronizing power windows ...... 198
Retractable hardtop............................ 199
Opening and closing the
retractable hardtop ....................... 199Driving systems .................................. 209
Cruise control ............................... 209
Distronic* ..................................... 213
Distance warning function* .......... 224
Active Body Control (ABC) ............ 225
Parktronic system*
(Parking assist) ............................. 228
Useful features ................................... 233
Storage compartments ................. 233
Cup holders .................................. 238
Ashtray ......................................... 239
Cigarette lighter............................ 239
Heated steering wheel* ................ 240
Load assist in the trunk ................ 241
Power outlet ................................. 242
Telephone* ................................... 243
Tele Aid......................................... 244
Garage door opener ...................... 251

33 At a glance
Overhead control panel
Overhead control panel
Item
Page
1
Left reading lamp on/off
134
2
Temperature sensor for
automatic climate control
184
3
Right reading lamp on/off
134
4
Interior lighting control
134
5
Interior rear view mirror
47, 180
6
Reading lamp
134
7
Garage door opener
251
8
Tele Aid (emergency call
system) button
244

251 Controls in detail
Useful features
Garage door opener
The integrated remote control is capable of
operating up to three separately controlled
devices. It provides a convenient way to re-
place up to three hand-held remote con-
trols used to operate devices such as
garage door openers, gate openers, or oth-
er devices compatible with HomeLink
® or
some other systems.
Before the integrated remote control can
be used, it must be programmed to the ga-
rage door opener, gate operator or other
device you wish to operate. See the follow-
ing instructions for programming informa-
tion.
Interior rear view mirror with integrated re-
mote control1Indicator lamp
2 3 4Signal transmitter button
Needed for programming (not part of vehi-
cle equipment):
5Hand-held remote control of ga-
rage door opener, gate operator
or other device
6Hand-held remote control but-
ton
Warning!
G
Before programming the integrated remote
control to a garage door opener or gate
operator, make sure people and objects are
out of the way of the device to prevent po-
tential harm or damage. When programming
a garage door opener, the door moves up or
down. When programming a gate operator,
the gate opens or closes.
Do not use the integrated remote control
with any garage door opener that lacks
safety stop and reverse features as required
by U.S. federal safety standards (this
includes any garage door opener model
manufactured before April 1, 1982).
A garage door that cannot detect an object
– signaling the door to stop and reverse –
does not meet current U.S. federal safety
standards.


252 Controls in detailUseful featuresProgramming the integrated remote
control
Step 1:
Switch on the ignition (
page 39).Step 2:

If you have previously programmed an
signal transmitter button and wish to
retain its programming, proceed to
step 3.
If you are programming the integrated
remote control for the first time, press
and hold the two outer signal transmit-
ter buttons2 and4 and release
them only when indicator lamp1 be-
gins to flash after approximately
20 seconds (do not hold the button for
longer than 30 seconds). This proce-
dure erases any previous settings for
all three channels and initializes the
memory.
If you later wish to program a second
and/or third hand-held transmitter to
the remaining two signal transmitter
buttons, do not repeat this step and be-
gin directly with step 3.Step 3:

Hold the end of hand-held remote
control5 of the device you wish to
train approximately 2 to 5 in
(5 to12 cm) away from the signal trans-
mitter button (2, 3 or4) to be pro-
grammed, while keeping indicator
lamp1 in view.
Step 4:

Using both hands, simultaneously
press hand-held remote control
button6 and the desired signal trans-
mitter button (2, 3 or4). Do not
release the buttons until step 5 is com-
pleted.
Indicator lamp1 will flash, first slowly
and then rapidly.
When programming a garage door opener,
park the vehicle outside the garage.
Do not run the engine while programming
the integrated remote control.
Inhalation of exhaust gas is hazardous to
your health. All exhaust gas contains carbon
monoxide (CO), and inhaling it can cause un-
consciousness and possible death.
i
Indicator lamp1 flashes immediately the
first time the signal transmitter button is pro-
grammed. If this button has already been pro-
grammed, the indicator lamp will only start
flashing after 20 seconds.


253 Controls in detail
Useful features
Step 5:
After indicator lamp1 changes from a
slow to a rapidly flashing light, release
the hand-held remote control button
and the signal transmitter button.
Step 6:

Press and hold the just-trained signal
transmitter button (2, 3 or4) and
observe indicator lamp1.
If indicator lamp1 stays on
constantly, programming is complete
and your device should activate when
the respective signal transmitter
button (2, 3 or4) is pressed and re-
leased.Step 7:

To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
Rolling code programming
To train a garage door opener (or other
rolling code devices) with the rolling code
feature, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Step 8:

Locate “training” button on the garage
door opener motor head unit.
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the
“training” button may also be referred
to as “learn” or “smart” button. If there
is difficulty locating the transmitting
button, refer to the garage door opener
Operator’s Manual. Step 9:

Press the “training” button on the ga-
rage door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the follow-
ing step.
Step 10:

Return to the vehicle and firmly press,
hold for 2 seconds and release the pro-
grammed signal transmitter button
(2, 3 or4).
Step 11:

Press, hold for 2 seconds and release
same signal transmitter button a sec-
ond time to complete the training pro-
cess.
i
If indicator lamp1 flashes rapidly for about
2 seconds and then turns to a constant light,
continue with programming steps 8 through 12
as your garage door opener may be equipped
with the “rolling code” feature.
i
Some garage door openers (or other rolling
code equipped devices) may require you to
press, hold for 2 seconds and release the same
signal transmitter button a third time to com-
plete the training process.


254 Controls in detailUseful featuresStep 12:
Confirm the garage door operation by
pressing the programmed signal trans-
mitter button (2, 3 or4).
Step 13:

To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.Gate operator/Canadian programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission
which may not be long enough for the
integrated signal transmitter to pick up the
signal during programming. Similar to this
Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner.
If you live in Canada or if you are having
difficulties programming a gate operator
(regardless of where you live) by using the
programming procedures, replace step 4
with the following:
Step 4:

Press and hold the signal transmitter
button (2, 3 or4). Do not release
this button until it has been successful-
ly trained.

While still holding down the signal
transmitter button (2, 3 or4),
“cycle” your hand-held remote control
button6 as follows: Press and hold
button6 for 2 seconds, then release
it for 2 seconds, and again press and
hold it for 2 seconds. Repeat this se-
quence on the hand-held remote con-
trol until the frequency signal has been
learned. Upon successful training, indi-
cator lamp1 will flash slowly and then
rapidly after several seconds.

Proceed with programming step 5 and
step 6 to complete.
i
Upon completion of programming the inte-
grated remote control, make sure you retain the
hand-held remote control that came with the ga-
rage door opener, gate operator or other device.
You may need it for use in other vehicles, for fu-
ture programming of an integrated remote con-
trol, or simply for continued use as a hand-held
remote control to operate the respective device
in other situations.


256 Controls in detailUseful features

If another hand-held remote control is
available for the same device, try the
programming steps again using that
other hand-held remote control. Make
sure new batteries are in the hand-held
remote control before beginning the
procedure.


Straighten the antenna wire from the
garage door opener assembly. This
may help improve transmitting and/or
receiving signals.
i
Certain types of garage door openers are in-
compatible with the integrated remote control. If
you should experience further difficulties with
programming the integrated remote control,
contact an authorized Mercedes-Benz Center, or
call Mercedes-Benz Customer Assistance
Center (in the USA only) at
1-800-FOR-MERCedes, or Customer Service (in
Canada) at 1-800-387-0100.
i
USA only:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interfer-
ence, and
(2) this device must accept any interference re-
ceived, including interference that may
cause undesired operation.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.
i
Canada only:
This device complies with RSS-210 of Industry
Canada. Operation is subject to the following
two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference re-
ceived, including interference that may
cause undesired operation of the device.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.

458 IndexF
Filler neck, Engine oil 278, 279
First aid kit 388
Flat tire 405
Preparing the vehicle 405
Spare wheel 388, 405
Flexible Service System see FSS
Fluids
Automatic climate control
system 444
Automatic transmission 279, 444
Brake system 272, 444, 447
Capacities 444
Engine coolant 280, 444, 449
Engine oil 275, 444, 446
Power steering 444
Retractable hardtop, Hydraulics 444
Windshield washer and headlamp
cleaning system 444
Fog lamps 131
Messages in the multifunction
display 380, 382
Replacing bulbs 398
Front air bags 71
Front lamps see HeadlampsFront passenger front air bag
Messages in the multifunction
display 356–359
Front passenger front air bag off indicator
lamp 76, 345
FSS (Canada only) 319
Fuel 271
Additives 448
Capacity, Fuel tank 444
Consumption statistics 163
Filler flap 271
Fuel reserve warning lamp 29, 339
Gasoline additives 448
Gauge 29
Premium unleaded gasoline 272,
445, 447
Refueling 271
Requirements 448
Fuel filler flap
Opening 271
Fuels, coolants, lubricants etc.
Capacities 444
Functions (control system) 141
Fuse chart see Vehicle tool kit
Fuses 424G
Garage door opener 251
Gasoline see Fuel
GAWR 312
Gear range
Automatic transmission 172
Canceling limit 175
Indicator 29
Limiting 172
Shifting into optimal 175
Gear selector lever 32, 168
Cleaning 328
Lock 52
Position 168, 170
Global locking/unlocking see Key
Glove box 233
Good visibility 180
Gross Axle Weight Rating see GAWR
Gross Vehicle Weight Rating see GVWR
Gross Vehicle Weight see GVW
GVW 312
GVWR 313